BVKHD - PURE LEAD

  • MSDS: BVKHD
  • Manufacturer: MC CANFIELD SONS
  • Product Name: PURE LEAD
  • National Stock Number: 3439-00N050881
Product Identification

Product ID:PURE LEAD
MSDS Date:09/01/1986
FSC:3439
NIIN:00N050881
MSDS Number: BVKHD

Responsible Party
MC CANFIELD SONS
1000 BRIGHTON STREET
UNION, NJ 07083
US

Emergency Phone: 201-688-5050

Info Phone: 201-688-5050

Cage: IO796

Contractor
MC CANFIELD SONS
UNION, NJ 07083 US

Telephone: 201-688-5050

Cage: IO796

Ingredients

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 99.9%

OSHA PEL O/K 1910.1025

ACGIH TLV: 0.15 MG/M3,DUST

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC OVEREXPOSURE TO HIGH LEVELS OF
AIRBORNE/INGESTED LEAD MAY RESULT IN LEAD INTOXICATION W/SYMPTOMS
OF ANEMIA, INSOMNIA, WEAKNESS, CONSTIPATION, NAUSEA & ABDOMINAL
PAIN. PROLONGED OVEREXPOSURE MA Y RESULT IN KIDNEY & NERVOUS SYSTEM
DAMAGE. LEAD APPEARS ON THE NAVY LISTING OF OCCUPATIONAL CHEMICAL
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZ:REPRODUCTIVE HAZARDS. SEEK
CONSULTATION FROM APPROPRIATE HEALTH PROFESSIONALS CONCERNING
LATEST HAZARD LIST INFORMATION AND SAFE HANDLING & EXPOSURE
INFORMATION .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INDIVIDUAL SHOULD BE REMOVED FROM EXPOS & PHYS CONSULTED. FOR
HOT METAL BURNS, EXPOS AREA SHOULD BE COOLED W/WATER & MED ATTN
SOUGHT. INGEST:CALL MD IMMED . INHAL:REMOVE TO FRESH AIR. SUPPORT
BR THG (GIVE O*2/ARTF RESP) . EYES:IMMED FLUSH W/POTABLE WATER FOR
MIN OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH W/COPIOUS
AMTS OF WATER. CALL MD .

Fire Fighting

Extinguishing Media:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:WHEN HEATED TO POINT OF VAPORIZATION, TOXIC
FUMES ARE EMITTED. USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FIRE AND EXPLOSION HAZARDS MOD IN FORM OF
DUST WHEN EXPOS TO HEAT/FLAME. WHEN HEATED, LEAD EMITS HIGHLY TOXIC
FUMES; CAN REACT VIGOROUSLY W/OXIDIZING MATLS.

Accidental Release

Spill Release Procedures:AVOID INHAL OF DUST/FUMES IN CONCENTRATIONS
EXCEEDING OSHA LIMITS. VACUUMING RECOMMENDED. USE APPRVD
RESPIRATORY PROT IF POSSIBILITY OF DUST/FUMES EXPOSURE EXISTS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID INHAL & INGEST OF LEAD
DUST/FUMES IN CONCENTRATIONS ABOVE OSHA LIMITS.
Other Precautions:FOOD & DRINK SHOULD NOT BE CONSUMED OR TOBACCO
PRODUCTS USED, NOR COSMETICS APPLIED IN AREAS WHERE METAL EXPOSURES
EXCEED APPLICABLE LIMITS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED DUST/FUME RESPIRATOR SHOULD
BE WORN WHERE APPLICABLE LIMITS MAY BE EXCEEDED.
Ventilation:LOC EXHAUST:ADEQ VENT SHOULD BE USED WHEN MATERIAL IS IN
MOLTEN/DUSTY STATE. MECHANICAL:SAME AS LOC EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:WORK CLOTHES SHOULD BE WORN & LAUNDERED
I/A/W OSHA LEAD STANDARD 1910.1025.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:2437F,1336C
Vapor Pres:1 @ 973
Vapor Density:11.288 @20
Spec Gravity:11.3
Solubility in Water:NOT SOLUBLE
Appearance and Odor:BLUISH-GREY SOFT METAL

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:CONTACT W/HYDROGEN PEROXIDE MAY CAUSE A
VIOLENT REACTION. LEAD CAN REACT VIOLENTLY W/OXIDIZING MATERIALS.
Hazardous Decomposition Products:AT TEMPERATURES ABOVE MELTING POINT,
LEAD OXIDE FUMES MAY BE EVOLVED.

Disposal

Waste Disposal Methods:SCRAP OR WASTE SHOULD BE RECYCLED OR DISPOSED OF
IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.